Kitzel Home
About Us
Services
Good As New
Representatives
Industry Links
Contact Us
CBN Edge Prep Guidelines
Cutting Forces:
| High Content CBN | Low Content CBN | |||
|---|---|---|---|---|
| Chamfer Dimensions | Rough | Finish | Rough | Finish |
| Hardened Steel | 25° x .20mm* | 25° x .20mm* | 25° x .10mm | |
| Hard Facing Alloys | 20° x .20mm* | 25° x .10mm | ||
| Soft Cast Iron | 20° x .20mm* | 20° x .20mm* | – | – |
| Superalloys | 20° x .20mm* | Sharp | – | – |
For most roughing operations and all interrupted cuts,
an additional .005” (12um) hone is recommended.
Special hones are available.
E. C. Kitzel & Sons, Inc.
4775 Manufacturing Avenue
Cleveland, Ohio 44135
Tel: 216.267.6850
Toll Free: 800.227.0431 (Outside Ohio)
Fax: 216.267.6714
Email: info@kitzel.com
Website: www.kitzel.com
E. C. Kitzel & Sons, Inc. l 4775 Manufacturing Avenue l Cleveland, Ohio 44135 l TF: 1.800.227.0431 l P: 216.267.6850 l F: 216.267.6714
Copyright © 2010 E. C. Kitzel & Sons, Inc. All rights reserved.
